The EVX electronic frame has a patented system which eliminates the need to adjust the solenoid as with other frames. Upon removing the wraparound grip you will notice that our design is significantly different than other frames. We manufactured the EVX-II from 6061 aluminum making it strong enough to support heavier nitrogen and compressed air tanks. Our sear is very robust and the trigger tension is adjustable to suit the players’ liking. There is a charger port at the back of the frame as well as an ON/OFF switch which cuts power to the electronic board. This serves as the safety for the marker. There are three shooting modes: Full auto, 3 shot burst and semi auto with a tournament lockout allowing only semi auto firing. The mode switch is located at the back of the frame and is recessed to prevent accidental changing of mode while playing. It is capable of shooting up to 14 BPS in semi mode, 10 BPS in full auto and burst mode. The electronics control the firing sequence with precision and has a battery saving function to prolong battery life. While selecting the mode the LED flashes to indicate the mode of operation. The LED is turned off within 10 seconds after selecting the mode. The EVX-II board shuts down after 5 minutes of inactivity and automatically “wakes up” when the trigger is pulled. When the battery is low, the EVX-II will automatically shutdown. It comes complete with a 9 volt alkaline battery pre-installed, installation screws and detailed instructions. It is available in six colours: Black, Red, Blue, Green, Pewter and Champagne. Mounts directly to the bottom of the Fokus handle frame and fits all nitrogen and compressed air tanks. The bottle adaptor slides forward as much as 5” with a 4” drop. The cradle portion has a dovetail at the end to accept tanks with dovetail mounting. It is available in six colours; Black, Red, Blue, Green, Pewter and Champagne. The expansion chamber will prevent liquid CO2 from entering the gun which will help control velocity and avoid freeze ups. It has a 4 stage core and a movable shell so you can adjust it to suit your marker. It has standard ASA threads. It is available in six colours; Black, Red, Blue, Green, Pewter and Champagne. We can customize your Fokus to include an EVX frame, expansion chamber, drop forward and air system. All custom configurations are assembled and tested in our factory. Custom set-ups will take approximately 7-10 days to deliver. Contact Mokal for delivery times. Fokus rebuild kit contains the following parts:
The tool kit contains all the hex keys for the screws in the Fokus.